Lift Table with Sliding Platform

Lift Table with Sliding Platform

A company specializing in vacuum heat treating contacted Pentalift for a lift table with a sliding platform as a solution to increase their efficiencies when loading a furnace. The furnace is a 36’ long car bottom design and the transfer car is loaded outside the furnace and once loaded is moved into position.

Lift Table with Sliding Platform Application

The product for the furnace is stacked on the transfer car, the lift tables serve as work platforms elevating the production team as the product is stacked, and lowers them as the product is removed after heat treating.

There is a pre-existing obstruction on both sides of the transfer car frame which prevents the lift tables from being installed adjacent to the car. Because of this, Pentalift designed the lift tables to raise - and once the obstruction is cleared - a sliding deck extended close to the car to allow for easy loading.

Installation of Lift Table with Sliding Platform

The installation consists of a 12’ long 10,000 lb capacity and a 24’ long 20,000 lb capacity lift table on either side of the transfer cart. The lift tables all provide 5’ of lift; all platforms are equipped with control stations, shelving, high visibility guard rails and access chains.

Additional Lift Table with Sliding Platform project

Based on a previous successful project with Pentalift a customer in the heat treating industry contacted Pentalift once again. On the original project custom Pentalift lift tables were designed to load and off load heat treated steel from a 36’ long transfer cart.

https://www.pentalift.com/lift-tables/custom-high-capacity.php

https://www.pentalift.com/lift-tables/20,000lb-Capacity-Sliding-Lift-Table.php

https://www.pentalift.com/lift-tables/Triple%20Tandem%20Pwr%20lips-lift-Table.php

Lift Table with Sliding Platform Lift Table with Sliding Platform