ProSeries remote power units are generally installed right on the floor within close proximity of the lift table. Remote power units are supplied with 10’ of hydraulic hose as standard however longer hydraulic hose lengths are available; depending on the model up to 35’ of hydraulic hose can be ordered. An optional wall mounting bracket is available to install the power unit up off the floor and out of harm’s way. It is recommended to install this option with a minimum of 6’ of under clearance to minimize the potential for accidental impact causing possible personal injury or damage to the power unit. Installing the power unit in too small of a confine without proper ventilation can result in damage due to overheating and also make access for the initial electrical hook up, general maintenance and repairs challenging. These are the most common factors to consider when determining remote power unit placement.