Custom Equipment - All

Pentalift recently supplied four 15,000 lb. capacity hydraulic lift tables featuring a caster deck design. The caster decks allow the freight containers to be easily moved across the loading dock. The hydraulic lift tables have a usable platform size of 9’ wide x 13’ long

A financial company requested assistance with designing and selecting a dock lift to meet their unique application. For security reasons the vehicles had to be loaded within the confines of the building using a straight drive through traffic pattern. The dock lift shown is equipped with pocket style lift out guard rails,

One of the largest manufacturers of off road tires in the world, required an adjustable height work platform to assist in the inspection of the tires inner liner.

A well know art museum in the North East United States required 3 dock lifts for loading and unloading the rare and valuable pieces of art housed and exhibited in their facility

An Aerospace supplier loads components onto a “tilted” rack for shipment to an Aircraft Assembly Facility. Each rack, fully loaded weighs 2700 lbs. The racks were originally being loaded in a congested area,

A subway system maintenance lift designed for a municipal transit authority was engineered to raise and lower a subway passenger car to facilitate scheduled maintenance.

An open roofed major league baseball stadium lacked room to store ground tarps when not in use.

The 3,000-lb. capacity No-Low lift table has a lowered platform height of only three inches and a vertical lift of up to five feet. It does not require a recessed pit for installation and can be integrated with other material handling equipment. Features include:

Photographed is 1 of 4 Hydraulic Lift Tables designed and built for a manufacturer of “Pre-Fab” Freezer Warehouses. In addition to raising and lowering 10,000 lbs,

Product positioning is required but recurring equipment damage from a harsh automotive environment is a concern.

Pentalift engineered and manufactured an application designed tandem (dual leg set for improved stability) hydraulic lift table to safely raise and lower the broadcast studio during the weekend’s events.

Multi-step palletizing operation in a brewing facility required redesign to improve efficiency. Application designed scissor lift with PLC controlled raise, lower, rotate and eject functions automates the palletizing operation. Design

Application designed and utilized in the assembly of Fuel Cells. Four post design features precise repeatable positioning and unobstructed access to product to minimize contamination lift was painted with a two part epoxy finish.

A manufacturer of breakfast cereals contacted Pentalift to discuss a solution for an ongoing wash down application. After the batch mixing process was completed the stainless steel containers were washed and sterilized prior to

Positioning equipment required to assist in adjustment and test procedures of jet aircraft engines. Two 4,000 lb. capacity lift tables per test cell.

Turbine engine manufacturer requires adjustable work station for engine testing procedures. Two tandem scissor tables (left and right hand designs)

A manufacturer of automotive components had an application that required lifting and off loading palletized product in a size restricted area. The solution was to use a Pentalift Pro Series hydraulic lift table equipped with a roller

A manufacturer of textile products contacted Pentalift for a safe and efficient method to empty a 51” wide x 40” long 1,000 lb container 120 degrees.. The

Steel Mill requires positioning equipment to “down end” 25,000 lb. Ingot of steel. Positioning equipment receives steel ingot in raised/vertical position down ends ingot into horizontal position.

Pentalift successfully designed and engineered 2 sets of Hydraulic Lift Tables and Hydraulic Up-Enders for use in a Foundry application. This Foundry casts engine blocks for many of the largest Diesel Engines used in the Locomotive,

The lift table is approximately 10’ wide, 16’ long with a 100,000 lb structural roll over capacity. All vehicle traffic is directed through an access tunnel.

An installation in a steel processing plant where two high-capacity tandem lift tables operate side by side. Each lift table features 6' of vertical travel and lifting capacities to 120,000 lb.

A Steel Mill required a high capacity lift table with a minimal platform size. The lift table illustrated was designed with a platform size approximately 4’ wide x 9’ long and a lifting capacity of 50,000 lbs.

Three 50,000 lb capacity, tandem scissor leg lift tables were purchased and installed into a 10' deep concrete pit. When the Lift Table(s) is in the fully raised position it is level with the floor.

Nuclear submarines are dry docked for retrofit of new sonar array sections. Application designed portable positioning systems feature dual speed lift/lower, 75% off center load handling capabilities and precise positioning

Theatre department retrieves stored props and theatre equipment from the basement underneath the stage. A triple scissor lift with 19’ of vertical travel.

Theatre department retrieves stored props and theatre equipment from the basement underneath the stage. A triple scissor lift with 19’ of vertical travel.

High-precision lift utilized in NASA-Advanced X-Ray Astrophysics Facility Imaging (AXAF-1). Unit is used to lift and position optics. Application designed and engineered a four-post lift with 4,000 lbs lifting capacity.

A medical supply warehouse required access to an upper level to permit the transfer of their products. The Pentalift No Low lift table shown features a drive through design; this feature eliminated the requirement of costly pit

A commercial baker of organic products required a custom designed lift to transfer ingredients from the storage location to an elevated mixing area. As limited space and vertical travel were the prime factors to address Pentalift

One of North Americas most recognized food processing companies required a group of 3 scissor lifts to work in co-ordination in one of their poultry plants. These 3 lifts are approximately 3’ wide, 28’ long and rise to a height of

A manufacturer of Aerospace composites required an application designed lift to suit a unique application in their manufacturing process. The 1,000 lb capacity lift table had to be fully portable, include a rotating top with a section

Internationally known manufacturer of Agricultural and Construction equipment recently entered into the ATV market. The ATV, weighing approximately 2000 lbs, is assembled on a moving production line.

A new dual direction tilt table designed for a personnel carrier manufacturer was engineered as the central component in a research and development test station. The table facilitates the off-center testing of a personnel carrier

A Heavy Capacity Hydraulic UpEnder was designed and manufactured to rotate 30,000 lbs from the vertical position to the horizontal position. To assure safety and provide smooth, even transition during the tilting operation

A leading provider of injection molded plastic parts looked into suppliers to replace their existing custom hydraulic lift table. After an evaluation including a thorough product comparison was completed the customer awarded the