The Pentalift Loading Dock Design Guide was created to assist in designing a loading dock area which is both functional and safe. Use it as a guide when first considering
specifying dock equipment and lift tables
into your design.
Pentalift Lift Table Sales Guide offers information on ergonomically based workplace improvements - like the installation of a lift table - and its effect on productive, safe and
reliable human performance.
1910.23(c)(1) Every open-sided floor or platform 4 feet or more above adjacent floor or ground level shall be guarded by a standard railing (or the equivalent as specified in
paragraph (e)(3) of this section) on all open sides except where there is entrance to a ramp, stairway, or fixed ladder. The railing shall be provided with a toeboard wherever
, beneath the open sides.
1910.23(e)(3)(iv)The anchoring of posts and framing of members for railings of all types shall be of such construction that the completed structure shall be capable of
a load of at least 200 pounds applied in any direction at any point on the top rail.
The American Society of Safety Engineers was founded in 1911 and is the world's oldest professional safety society setting the occupational safety, health and environmental development community's standards for excellence and ethics.
The Voluntary Protection Programs Participants' Association is the premier global safety and health organization, dedicated to cooperative occupational safety, health and
environmental management systems.
Canadian Centre for Occupational Health and Safety
Occupational Safety & Health Administration
American National Standards Institute - ANSI is the voice of the U.S. standards and conformity assessment system and as such empowers its members to assure the safety and health of consumers and the protection of the environment.
Federal Motor Carrier Safety Administration was established within the Department of Transportation in January, 2000. Part of what the administration does is collects and disseminates data on motor carrier safety.
Our Primary Goal is to engineer and build the best lift table products to ensure the ultimate in user safety and
a Pentalift sales representative to discuss
your application requirements.