Hydraulic Lift Table Equipped with conveyor top
A manufacturer of automotive components had an application that required lifting and off loading palletized product in a size restricted area. The solution was to use a Pentalift Pro Series hydraulic lift table equipped with a roller conveyor top. To achieve the vertical travel required within the restricted area a specific model was selected, however it was necessary to off load over the sides of the platform. The lift table was designed and rated to accommodate the roller conveyor being installed 90 degrees to the typical orientation. The powerunit supplied is a 460/3/60 3 HP assembly complete with a NEMA4 push button control. Accordion bellows were also supplied to minimize debris entry under the lift table platform (not shown).