Vertical Storing Dock Leveler

Benefits

	Stops forklifts from falling off loading dock when in stored position
	4" high fork lift run-off guards
	Stored inside the building for better Environmental Control
	Safe, easy clean pit design
	Safer over centered storage design

Description

Vertical Storing Dock Levelers are hydraulically operated dock levelers which are typically installed when pit cleanliness, climate control, vermin entry and/or building security issues are concerns. This style of leveler is ideally suited for cold storage, food processing, and pharmaceutical facilities.
As the name indicates, this style of dock leveler is vertical when in the stored or parked position making the leveler pit fully accessible for clean up purposes. Also, this design permits the overhead door to close to the base of the pit with no air loss gap and no access for vermin entry.
When the overhead door is closed and the leveler is in the vertical position, it acts as a roll off barrier as well as a visual barrier. Consequently, the overhead doors are protected against damage from loading vehicle impacts.
It is common to equip vertical storing dock levelers with 4" high runoff side guards along the lengths of both sides to increase safety during loading/unloading operations.

Operation
When servicing a trailer, the vertical storing dock leveler lowers at a controlled rate until it rests on the bed of the trailer. After the loading/unloading operations are finished, the operator activates the raise button to bring the leveler back to the vertical (stored) position. For additional safety the leveler is stored with the lip extended leaning back in an over centered position, the leveler design incorporates a double acting cylinder to safely power up and down the dock levelers eliminating the need for a manual lock and release system. Also, an optional emergency stop button is provided to halt the lowering of the deck if necessary.

Options

	18" to 20" lip length
	self-contained power unit
	can be interlocked with other dock equipment
	other options available

Specifications

Hydraulic Vertical Storing Dock Leveler(s) Model HDV as manufactured by Pentalift Equipment Corporation. Unit to have a nominal deck size of _____' wide x _____'long, and a rated capacity of _____lb. Leveler to have an infinite control hydraulic lip plate. Deck support members shall be "C" shaped beams or opitional I beam (specify). Power unit to be NEMA 12. Control station to be remote and wall mounted. Unit to have a double acting deck cylinders and hydraulic lip cylinder. Unit to include 4" high run-off guards on deck plate. Unit to have Pentalift gray finish.

Model Selection Chart

Model	Deck Size	Capacity
HDV65XX	6' X 5'	25-50000 lb.
HDV66XX	6' X 6'	25-50000 lb.
HDV68XX	6' X 8'	25-50000 lb.
HDV655XX	6.5' X 5'	25-50000 lb.
HDV656XX	6.5' X 6'	25-50000 lb.
HDV658XX	6.5' X 8'	25-50000 lb.
HDV75XX	7' X 5'	25-50000 lb.
HDV76XX	7' X 6'	25-50000 lb.
HDV78XX	7' X 8'	25-50000 lb.

Listed below are the brochures and technical
Brochure
Brochure Files are in Adobe Acrobat PDF format. If you do not have Adobe Acrobat, click here to download a free copy from the Adobe site.