Linear Actuation : Engineered to
provide optimum reliability and
safety at the loading dock,
linear actuation assures
reliable performance. The up
travel trip cable stops lift
activation should barrier arm
contact obstacle while raising.
A weight compensated safety
switch will stop the downward
travel of the barrier should it
contact an obstacle.
Description
The Pentalift Safety Barrier is the ultimate
safety device, designed to serve all loading
dock applications. Not only does the Safety
Barrier prevent a fork truck from falling off
the loading dock, it also prevents damage to
closed overhead doors. The Pentalift Safety
Barrier will withstand the impact of a 5 ton
fork truck traveling at 4 mph. Supplied as an
independent safety device, the Pentalift Safety
Barrier is compatible with any make of hydraulic
or mechanical dock leveler or edge of dock and
even works at loading docks without dock
levelers.
Specifications
Linear Actuated Safety Barrier Model
No:__________ as manufactured by Pentalift
Equipment Corporation. The safety barrier shall
be of surface mount design positioned across the
door opening. Unit shall incorporate a pivot
assembly with linear actuated safety barrier arm
and a receiving carriage assembly. Both shall be
provided with pre-drilled mounting plates for
easy installation on concrete floor. The barrier
arm is to be of heavy-duty 50,000 psi yield
construction painted safety yellow. The pivot
assembly shall be enclosed in a protective
housing. Controls shall be remote wall mount
type with raise and lower switches. Required
power is 115 volt single phase. For additional
safety, the barrier arm is to be equipped with
an electrically interlocked trip cable and a
weight compensated safety switch.
Listed below are the brochures and technical
documents for this product: Spec Sheet
Brochure Files are in Adobe Acrobat PDF
format. If you do not have Adobe Acrobat, click
here
to download a free copy from the Adobe site.
