|
|
 |
|
|
|
Elevating Dock to be a Pentalift PO
Series Model HED685PO, 72" wide X 96"
long, with lifting capacity of 5,000 lb.
Axle load capacity shall be 2,500 lb.
over the sides. Unit to be supplied with
two (2), 42" high removable guardrails,
bevel toe guards and an integral
maintenance stand. Unit to have vertical
travel of 59", Elevating dock to have a
5 hp. remote power unit _/_/_. Control
to be NEMA 4X pendant type push button
in a weather resistant enclosure. Unit
lift speed to be 12 feet per minute.
This unit is recommended for use with
pallet jacks and manually pushed carts.
It is not recommended for use with
powered forklift trucks and other power
wheeled equipment.
|
|
|
|
Features |
 |
Exclusive
PentaFLOW bypass cylinders |
|
|
Hydraulic velocity fuse |
|
|
Elevated position of pivot points and
leg roller track keeps pivot pins and
rollers out of dirt and debris that can
accumulate in pit |
|
|
Remote 5 hp hydraulic power unit
230/1/60, 230 or 460/3/60 or 575/3/60 |
|
|
Pre-wired NEMA 12 motor controls |
|
|
Pre-wired NEMA 4X push button |
|
|
One piece high tensile steel checker
plate hinged lip 18" wide X 60" long c/w
positioning chain |
|
|
Lubricated-for-life, maintenance-free
bearing at pivot points |
|
|
High tensile steel checker plate deck |
|
|
Two 42" high removable steel guardrails
with midrail and 4" kick plate |
|
|
Plated access chains between guardrails |
|
|
Bevel toe guards suitable for pit
mounting(compliant with ANSI MH29.1) |
|
|
Integral maintenance stand |
|
|
Highly visible, detailed safety and
operation decals for greater visibility
and safety |
|
|
Description |
The HED685PO Elevating Dock is offered in the
most common size for elevating docks, 6 feet
wide X 8 feet long deck size and 5000 lb.
capacity. It is ideally suited for use in retail
stores or in any location that loads/unloads a
variety of trucks/trailers. It is a highly
effective solution for increasing loading dock
safety and efficiency.
|
|
Options |
|
|
Various horsepower and voltage power
units |
|
|
Push button with coil cord |
|
|
Twist lock plug for push button |
|
|
Safety trip bars |
|
|
Split lip |
|
|
Aluminum lip |
|
|
Swing-out night stops |
|
|
2 second warning bell |
|
|
Other bell and light combinations |
|
|
Up travel limit switch |
|
|
Other options available |
|
|
Note: |
Some photos may reflect products with optional
features. All Pentalift Equipment products are
subject to design improvements through
modification without notice.
|
|
Specification |
Elevating Dock to be a Pentalift PO Series Model
HED685PO, 72" wide X 96" long, with lifting
capacity of 5,000 lb. Axle load capacity shall
be 2,500 lb. over the sides. Unit to be supplied
with two (2), 42" high removable guardrails,
bevel toe guards and an integral maintenance
stand. Unit to have vertical travel of 59",
Elevating dock to have a 5 hp. remote power unit
_/_/_. Control to be NEMA 4X pendant type push
button in a weather resistant enclosure. Unit
lift speed to be 12 feet per minute.
Notes This unit is recommended for use
with pallet jacks and manually pushed carts. It
is not recommended for use with powered forklift
trucks and other power wheeled equipment.
|
|
Model Selection Chart |
|
HED685PO |
5000 lb. |
2500 lb. |
2500 lb. |
72" X 96" |
59" |
10" |
69" |
12ft/min |
25 sec. |
|
|
|
Listed below are the brochures and technical
documents for this product:
Brochure
Brochure Files are in Adobe Acrobat PDF
format. If you do not have Adobe Acrobat, click
here
to download a free copy from the Adobe site. |
|
|
|
|
