|
Description |
A lowered height of only 6” allows ground level
access without the need for construction of a
pit. With vertical travel of 54”, a Pentalift
Low Profile Elevating Dock can accommodate
truck/trailer heights from pick-ups to
semi-trailers. Since it requires no pit and has
the capability to be semi-portable, a Low
Profile Elevating Dock is an effective solution
for ground level doors, confined spaces and
leased building applications. Sizes and
capacities are available to suit a wide range of
applications.
The Pentalift Low Profile Elevating Dock is a
surface mounted, stationary or semi-portable
unit offering several deck sizes with different
capacities. The design of the LPE unit ensures
maximized stability and full use of the deck
area for product transfer. Cylinder placement is
completely beneath the deck eliminating above
deck obstructions common to other designs with
vertical or mast type cylinder arrangements.
Full use of the deck area adds the capability to
load/unload in all four directions for greater
efficiency and reduced product damage.
A minimal lowered height of 6” facilitates easy
access for all types of material handling
equipment. A hinged approach ramp can be mounted
on the fixed end of the deck of the elevating
dock to provide ground access.
A 18” long x 60” wide hinged one piece steel
checker plate lip is mounted on the rolling end
of the deck of the elevating dock to facilitate
access to the truck/trailer. Lip options
include: aluminum lip, larger sizes, one piece
and/or split construction.
Pit construction is not required for the low
profile model. This saves installation costs and
makes relocation easier than it is for pit
mounted elevating docks. |
|
Options |
 |
automatic mechanical roll off stop |
|
|
retaining cradles and wear plates |
|
|
aluminum lip |
|
|
split lip |
|
|
larger lip sizes |
|
|
up travel limit switch |
|
|
deck mounted power unit |
|
|
power units with increased hp for faster
lift times |
|
|
semi-portable design |
|
|
other options available |
|
|
Note: |
Some photos may reflect products with optional
features. All Pentalift Equipment products are
subject to design improvements through
modification without notice.
|
|
Specifications |
|
Low Profile Hydraulic Elevating Dock Model
___________________ as manufactured by Pentalift
Equipment Corporation. Elevating dock to have a
deck size of _____" wide x _____" long, built of
4-way safety tread plate. The unit shall have a
lifting capacity of _____ lb with vertical
travel of 54" and a lowered height of 6". An 18"
long x 60" wide safety tread bridge plate is to
be provided on the rolling end. A 36" long x 60"
wide hinged approach plate will be provided on
the fixed end. Hydraulic lift cylinders shall be
PentaFLOW style equipped with an automatic
bypass system at the top of cylinder stroke.
Hydraulic cylinders to be advantageously located
completely beneath the unit to permit both full
use of deck area and product transfer in all
four directions. A velocity fuse shall be
incorporated to prevent deck free-fall in the
event a hydraulic hose is accidentally severed.
Scissor legs shall be of solid steel
construction for maximum strength and rigidity.
Unit to have two removable guardrails 1 518" in
diameter, 42" high with midrail and 4" high
kickplate. Controls to be NEMA 4X pendant type
push-button. The power unit is to be remote
mounted and consist of a TEFC, continuous duty
motor with integral hydraulic fluid reservoir.
The motor shall be equipped with a NEMA 12
control enclosure. Power supply to be
_____/_____/_____. The low profile elevating
dock shall be shipped complete with hydraulic
fluid. Unit to have Pentalift gray finish. |
|
Model Selection Chart |
|
LPE 58x |
60 in x 96 in |
54" |
3000-8000 lb |
5 3/4" |
|
LPE 510x |
60 in x 120 in |
54" |
3000-8000 lb |
5 3/4" |
|
LPE 68x |
72 in x 96 in |
54" |
3000-8000 lb |
5 3/4" |
|
LPE 610x |
72 in x 120 in |
54" |
3000-8000 lb |
5 3/4" |
|
LPE 78x |
84 in x 96 in |
54" |
3000-8000 lb |
5 3/4" |
|
LPE 710x |
84 in x 120 in |
54" |
3000-8000 lb |
5 3/4" |
|
LPE 88x |
96 in x 96 in |
54" |
3000-8000 lb |
5 3/4" |
|
LPE 810x |
96 in x 120 in |
54" |
3000-8000 lb |
5 3/4" |
|
|
|
Listed below are the brochures and technical
documents for this product:
Specific Brochure Page
Full Brochure
Brochure Files are in Adobe Acrobat PDF
format. If you do not have Adobe Acrobat, click
here
to download a free copy from the Adobe site. |
