The majority of vehicle restraints are fastened directly to the face of the foundation wall. In some cases the foundation wall will not withstand the forces to hold the vehicle restraint in position such as a concrete block wall or a brick wall. In new construction with the concrete pre cast (tilt up) wall the contractor often specifies that nothing is to be bolted to the face of the wall. To address a vehicle restraint installation that cannot be attached to the foundation wall Pentalift has designed a new model of vehicle restraint that is bolted down into pre cast concrete. A concrete pad is poured of sufficient depth and strength to accommodate the forces and loads to hold the truck in position. The newly released Pentalift model HFR32SM is positioned tight to the face of the foundation wall , centered under the overhead door and is bolted down into a precast concrete pad.
Contact a Pentalift Sales Representative for more information