Pentalift Blog - January 2018

We are Building a New Factory. How Do We Determine our Dock Leveler Load Capacity?

The common dynamic total load multiplier is 2.5 when calculating capacity for standard dock leveler applications. However, dynamic total load multiplier can range from 2.0 to 5.0, depending on the severity of the application and the manufacturer. Since there is no recognized industry standard, manufacturers rate their capacities differently. Some may use lower multipliers to be more competitively priced or leave the impression that their particular dock leveler is stronger than other manufacturers. Variables like fork trucks, fork truck weights, type and speed could create the need to increase the dynamic total load multiplier. Click here for an example on how to calculate.

Contact a Pentalift Sales Representative for more information.

[read more]

What Are the Factors Involved Using a Pour In (Cast in Place) Dock Leveler?

[read more]

Why Would You Project or Cantilever a Dock Leveler Pit?

Declining driveway approaches are very common at the loading dock area. Incoming vehicles are backed into position at an angle determined by the percentage of the decline. The most effective method to address this situation is to project the dock leveler pit forward. The amount of projection is determined by the percentage of the driveway decline. Projecting the dock leveler pit at the onset eliminates damage caused by vehicle impact to the building and the resultant need for aftermarket bumper extensions, longer hinged lip assemblies etc. to address this condition. Please click here for more information.

Contact a Pentalift Sales Representative for more information.

[read more]

Characteristics of Tandem Lift Tables.

A Tandem Lift Table is a table that is used for an application in which the platform’s length needs to be much longer than the platform’s width. Tandem Lift Tables are generally used to assist lengthy and narrow applications such as long pieces of wood, 2x4’s or hydro poles. To support the oversized load, there are 2 sets of scissor legs under the table’s platform to accommodate the load it is lifting. Tandem lift tables cost more than standard lift tables but are the perfect piece of equipment for certain applications.

Contact a Pentalift Sales Representative for more information.

[read more]